MitraMSI > Motherboard > MSI Big Bang Fuzion Motherboard Detailed
MSI Big Bang Fuzion Motherboard Detailed23 November 2009. Author: mitramsi |
|
Specification Form Factor: ATX (30.5×24.4cm) Processor Support: Intel Core i7 and Core i5 (Lynnfeld & Clarkdale) processor LGA1156 Base Clock: 133 MHz Chipset: Intel P55 / Lucid Hydra 200 chipset Memory Support: 4 DDR3 DIMMs support DDR3 2133 *(OC)/ 2000 *(OC)/ 1800 *(OC)/1600 *(OC)/ 1333/1066 DRAM (16GB Max) Supports Dual-Channel mode LAN: Supports Dual LAN (10/100/1000) by Realtek RTL8111DL IEEE 1394 Chip integrated by VIA VT6315N Transfer rate up to 400Mbps Audio: QuantumWaveTM Audio Card Creative EAX ADVANCED HD 5.0 THX TruStudio PCTM Creative ALchemy 7.1 Channel High Defnition Audio Codec with jack sensing Realtek ALC889 Compliant with Azalia 1.0 Spec Supports1x S/PDIF out header Supports Coaxial/Optical S/PDIF out ports on rear IDE: 1 IDE port by Jmicron JMB363 Supports Ultra DMA 66/100/133 mode Supports PIO, Bus Master operation mode SATA: 6 SATAII (SATA1~6) ports by Intel P55 4 SATAII (SATA7/ 8/ 9/ 10) ports by two JMicron JMB322 2 ESATA/ USB Combo port (back panel) by Jmicron JMB362 Supports storage and data transfers at up to 3 Gb/s RAID: SATA1~6 support Intel Matrix Storage Technology (AHCI/ RAID 0/ 1/ 5/ 10) by Intel P55 Hardware RAID SATA7 & SATA8 support RAID 0/ 1 & JBOD mode by 1st Jmicron JMB322 SATA9 & SATA10 support RAID 0/ 1 & JBOD mode by 2nd Jmicron JMB322 Connectors: Back panel - 1 PS/2 keyboard port - 1 PS/2 mouse port - 1 D-LED3 panel connector (optional) - 8 USB 2.0 ports - 1 IEEE 1394 port - 2 ESATA/ USB Combo port - 2 LAN ports On-Board - 2 USB 2.0 connectors - 1 IEEE 1394 connector - 1 Chassis Intrusion connector - 1 TPM Module connector (optional) - 1 Green Power Genie connector (optional) - 1 Over-Voltage switch & 1 set voltage check point - 1 Power button - 1 Reset button - 1 Green Power button - 1 Clear CMOS button - 1 OC Genie button - 1 CPU Phase LED panel Slots: 3 PCI Express 2.0 x16 slots - PCI_E2/ PCI_E4/ PCI_E5 will be x16/ x16/ x0 or x16/ x8/ x8 2 PCI Express 2.0 x1 slots - Only PCI_E1 supports installing the Realtek Audio card 2 PCI 2.2 slots, support 3.3V/ 5V PCI bus Interface
Hardware and Software Support The supporting list for current HYDRA driver (version 1.3.105) are described in this section. Hydra driver will be updated to support more new OS, GPUs and display drivers. Therefore, it may be changed depand on the latest version of the driver. Supported Operating Systems: Microsoft Windows Vista (SP2) 32-bit and 64-bit - Support dual NVIDIA graphic cards - Support dual ATI graphic cards Microsoft Windows 7 RTM OS 32-bit and 64-bit - Support dual mixture of NVIDIA and ATI graphic cards - Support dual NVIDIA graphic cards - Support dual ATI graphic cards Microsoft Windows Editions include: - Windows Vista Home Basic - Windows Vista Home Premium - Windows Vista Business - Windows Vista Enterprise Edition - Windows Vista Ultimate - Windows 7 (RTM) Home Premium - Windows 7 (RTM) Professional - Windows 7 (RTM) Ultimate Supported graphic libraries: DirectX 9 DirectX 10 Supported GPUs and display drivers: NVIDIA - GPUs G90/G200 series, Single core only, no Dual core GPU support in this version (GTX295 is not supported) - NVIDIA display drivers: 185.85, 186.18, 190.38, 190.62, 191.07 AMD/ATI - GPUs HD4XXX series, Single core only, no Dual core GPU support in this version (HD4870×2 is not supported) - ATI/AMD display drivers: Catalyst 9.7 and up Multi vendor - Operating system: Windows 7 only (due to native limitations of other Windows versions) - GPUs: NVIDIA G90/G200 series, AMD/ATI HD4xxx Series, Single core only, no Dual core GPU support in this version - Display drivers: NVIDIA 185.85, 186.18, 190.38, 190.62, 191.07 / AMD/ATI Catalyst 9.7 and up Important: The Hydra driver only support up to 2 graphics cards in this version. The future version will support up to 3 graphics cards. Then you only need to update the driver.
Games qualifed Using PhysX/Physics with 3rd GPU
The HYDRA driver enables to use a 3rd GPU card installed on the system for PhysX/Physics calculation. In order to active this feature: - A 3rd GPU should be installed on the available PCI-E slot. - The 3rd GPU can be a much lower performance that the other 2 GPUs (for example, 2x GTX260 for graphic enhancement and 1x GT9600 for PhysX/Physics). Back |